02071667835 Cubitt Town E14,E15,E16 Family Run Emergency Underfloor Heating Leaks Repairs Docklands,E1,E2,E3,E4 East London Electric,Wet Underfloor Heating Specialist Shortlands E11,E12,E13,E14,E15,E16,E17,E18 Bromley BR1,BR2,BR3,BR4,BR5,BR6,BR7,BR8

Print

three_wet_floor

 

“Reliable Family Run (Husband & Wife Formed)”

"Twice recommended by"Time Out" London in 2006"

"Finalist of the Training and Development Barking & Dagenham Business Awards 2008" 
"Finalist of  the "Best New Business"  and " Entrepreneur of the year" Kingston  Business Awards 2010"

 

Example of Underfloor Heating Manufacturers that we deal with

 

 

http://www.warmup.co.uk     WARM UP  underfloor heating

 

http://www.heatmat.co.uk   HEAT MAT underfloor heating

 

http://www.beama.org.uk/en/energy/underfloor-heating/ 

 

http://www.devi.co.uk/      DEVIREG undefloor heating

 

http://www.uponor.co.uk/     UPONOR underfloor heating

 

www.thermo-floor.co.uk   -   THERMO FLOOR underfloor heating

 

http://www.ebeco.com/en/index.php     -   EBECO underfloor heating

 

www.invisibleheating.co.uk  -   Invisible Heating Systems

 

http://www.florad.co.uk/   -   FLORAD  underfloor heating

 

www.floorheatingsystems.com 

 

www.enerfoil.com  -  ENERFOIL  underfloor heating

 

www.eco-hometec.co.uk  -    ECO HOME underfloor heating 

 

www.allbriteuk.co.uk   -    ALLBRITE Underfloor heating

 

http://www.thermogroupuk.com/   -    THERMO

 

http://www.nu-heat.co.uk -  Nu Heat Underfloor Heating

 

http://www.speedfitufh.co.uk

 

John Guest Underfloor Heaitng

 

 

What is a Manifold for Underfloor Heating?

The manifold is supplied with thermostatic option heads on the return and manually regulated flow gauges on the flow manifold. If individual control is needed, actuators can be mounted on the return manifold. The flow gauges on the flow manifold can easily be adjusted by using the key provided and adjusting the nut on the flow manifold before installing the actuators.

 

How do I operate the system?

You will have a room thermostat in each room, to set as you desire. In one room per floor

 

How is the pipe attached to the floor?

There are several methods of attaching underfloor heating pipes, Our most popular system is the Tacker system, where pipe is held in position with clips through the insulation. A wire grid system is available where pipework is held in place by cable ties affixed to the wire mesh. For joisted or batten floors we use a clip rail system where pipes are held by clipping into a plastic rail system. We have many other options available, please contact us for specific details.

 

 Where do you install Edge insulation?

Edge insulation should be installed around all the perimeters of each room.

 

What are the lengths of each loop?

The pipe is marked every meter. This makes it very easy to check the length of each loop.

 

 How do you lay the pipe?

Follow the AutoCad layout drawing which we will provided for every project.

 

What is the distance between pipe and walls?

The pipe distance from walls should be 100 mm.

 

What is the heat output?

Maximum heat output from screeded floors is approximately 100 W/m2, the maximum heat output from timber suspended floor and floating floor is 70 W/m2. With there being higher standards of insulation in new buildings, average heat requirements for many buildings are now below 60 W/m2. For small bathrooms it is standard practice to also install warm water towel rails to give extra heat output as these areas are usually not very large.

 

How do you fill the underfloor heating system?

The underfloor heating system should be filled with water and fully vented of air. This can best be achieved using mains water pressure through the two end caps. All valves should be closed and the flow end cap connected with a hose to mains water, with the return end cap connected to a hose laid to waste water point. One by one flow and return valves are opened and closed on loop purging them of air.

 

 East Central & West Central London emergency plumbers EC1,  EC2,  EC3,  EC4. City of London local emergency plumbers  WC1,  WC2  West end London W1,W2, W3, W4, W5, W6, W7, W8,  W9,  W10,  W11,  W12,  W13,  W14   Northwest London 24 hour good gas corgi engineers  NW1,  NW2,  NW3,  NW4,  NW5,  NW6,  NW7,  NW8,  NW9,  NW10,  NW11.  East London emergency reliable plumbers E1,  E2,  E3,  E4,  E5,  E6,  E7,  E8,  E9,  E10,  E11,  E12,  E13,  E14,  E15,  E16,  E17,  E18 Emergency 24 Hr family run recommended plumbing heating engineer Essex RM1, RM2, RM3, RM4, RM5, RM6, RM7, RM8, RM9, RM10, RM11, RM12, RM13, RM14, RM15, RM16, RM17, RM18, RM19, RM20, IG1, IG2, IG3, IG4, IG5, IG6, IG7, IG8, IG9, IG10, IG11 commercial domestic plumber RM1 RM2 RM3 Romford plumber RM4 RM5 RM6 RM7 Dagenham, Ilford plumber RM8 RM9 shower installer RM12 Dagenham cooker repair Havering boiler service Dagenham RM12 Havering Plumber boiler breakdown Morecambe close cooker and boiler breakdown service Hornchurch RM13 Rainham RM14 Upminster family run plumber RM15 South Ockendon plumbing heating engineer RM16 RM17 Grays RM18 Tilbury RM19 Purfleet RM20 Grays Romford, Rainham, Hornchurch gas engineer Chigwell, Ilford 24 Hr gas engineer Essex plumber Bexley, Bexley Heath gas engineer Biggin Hill 24Hrs emergency plumbing and heating services Blackfen Blackwall Woodgreen. Emergency 24 Hrs plumber IG7 Chigwell IG11 Barking IG2 Redbridge commercial & domestic heating gas plumbing engineer IG10 Loughton boiler repair and installation Ilford plumber IG8 Woodford green gas engineer IG9 Buckhurst Hill boiler repair and service IG10 Loughton Bromley & Kent BR1, BR2, BR3, BR4, BR5, BR6, BR7, BR8 Solar panel hot water heating systems installer Emergency 24 Hrs  plumber in  BR1  Bromley  Solar hot water heating systems installer BR1  Bickley  BR1  Downham   gas engineer  BR2   Keston  electrical safety certificate  BR2  Hayes   boiler repair & services BR2  Bromley Common BR2  Shortlands  family run plumbing and heating engineer plumber BR3  Beckenham  24Hrs Plumber in BR3  Eden Park   BR3 Elmers End   gas cooker , fire repair  BR4  West Wickham  gas safe registered engineer  BR5   Orpington   time out recommended Plumber  BR5  St Mary Cray commercial barbeque cooker maintenance and repair London     BR5 Petts Wood   trusted gas engineer in BR6  Orpington  BR6 Farnborough Park  boiler installer BR6 Downe  BR6 Pratt's Bottom  water heater repair  BR6 Chelsfield   emergency water leak family run Plumber  BR6  Well Hill   Elm Walk commercial & domestic heating plumbing service engineer BR7  Chislehurst  24 Hrs Plumber  in BR6 Elmstead   Electrician BR8  Swanley  bromley Plumber gas heating engineer BR7 BR8  Bromley  Solar hot water heating systems installer, LPG cooker boiler breakdown service Farnborough Park, Elm Walk commercial domestic awarded gas engineer in Farnborough